Home > Exhibition > Content

A brief discussion on the difference between hydraulic cutting machine and mechanical cutting machine

Aug 09, 2018

A brief discussion on the difference between hydraulic cutting machine and mechanical cutting machine


The main basis for judging the function of hydraulic cutting machine is the size of punching force and punching speed. The punching force is very big, but the punching speed is very low, or the punching speed is very high, but the punching force is very small machine, can not successfully complete the punching task.

The cutting machine with mechanical transmission generally has a higher punching speed, about 250 times per minute; its punching speed is variable, and the average punching speed is: 200mm/sec. The cutting speed of the hydraulic cutter is usually greater than 75 mm / sec.

The different points of the mechanical drive and the hydraulic drive are mainly determined by the different characteristics of the two kinds of transmission: the mechanical transmission is a rigid transmission, and the hydraulic transmission does have a certain flexibility.

The characteristics of hydraulic cutting machine are: when the cutting head is acting on the processed object through the tool die, the pressure in the cylinder does not reach the rated pressure. The pressure will increase with the increase of the contact time, until the electromagnetic reversing valve receives the signal, the reversing valve is changed and the cutting head starts to reset. The pressure in the cylinder is limited by the pressure time to enter the cylinder, and it may not reach the rated pressure value; that is to say, the system pressure has not reached the design value, and the punching cutting has been completed.

1.jpg