Home > Exhibition > Content

Cutting machine maintenance knowledge [Ponse cutting machine]

May 07, 2018

Cutting machine maintenance knowledge [Ponse cutting machine]


In the use of the cutting machine, because of the various wear, corrosion, fatigue, deformation, aging and other phenomena, the precision is reduced, the performance is reduced, and the quality of the product will be reduced. When the situation is serious, the equipment will stop. The maintenance of the machine is a technical activity adopted to maintain and repair the machine, to reduce the degree of its deterioration, to prolong the service life, to maintain or restore the functions specified by the machine. The operation of the hydraulic cutting machine includes checking, adjusting, lubricating, finding abnormal phenomena, processing and reporting in time. In order to ensure the normal operation of the machine, reduce wear, protect the accuracy and prolong the service life, it must be properly lubricated, maintained and maintained.

Requirements for maintenance and maintenance of oil pressure cutting machine:

The daily maintenance of the hydraulic cutting machine is the responsibility of the operator. Operators must be familiar with equipment structure and observe operation and maintenance procedures.

1, before the start of work (shift or interrupt work) check the main parts of the machine, add lubricating oil.

2, the class strictly use equipment according to the operation procedures of the equipment, pay attention to observe the operation of the equipment and find out the problems in time to deal with or report.

3. Before the end of each shift, a cleaning operation should be carried out, and lubricating oil on each friction surface and bright surface should be applied.

4. The machine will be cleaned and checked every two weeks under normal two shifts.

5. If the machine is to be used for a longer time, wipe all the bright surfaces and apply anti rust oil. Cover the machine with plastic cover.

6. No improper tools and unreasonable beating methods should be used when assembling and disassembling machines.

7, should regularly change hydraulic fluid (once a year), check whether the filter screen is blocked and cracked, whether each cylinder parts have oil leakage phenomenon.

QQ截图20151009145920.jpg