Safety matters needing attention in day-to-day operation of hot melt adhesive composite machine
Avoid the operation of hot melt glue machine around the volatile and explosive material or gas, and the flammable and explosive materials can not be stored around the spray equipment of the hot melt glue machine.
Not in the absence of appropriate protection, good insulator or good protection panel operation using hot melt glue machine, need maintenance only through professional training staff to maintenance.
Do not use hot melt adhesives at the temperature below 0 centigrade and the ambient temperature above 50 degrees C.
When hot melt adhesive is added, it should be added to the melt glue pot at least 1/3 of the hot-melt adhesive before avoiding the addition of glue to the hot-melt glue pot without hot melt adhesive, which will affect the normal production.
Try not to use the fast flow air. Because of the combination of hot melt adhesive sprayer and fast cooling air, the rapid cooling will affect the flow rate of the hot melt adhesive of the nozzle assembly, resulting in the phenomenon of wire drawing.
In the end, it is necessary to pay attention to eighty percent of the total volume of the hot melt adhesive pan when the adhesive needs to be added.