Special cutting machine for plastic suction lunch box [Ponse cutting machine]
Introduction of special cutting machine for sucking fast food box
The plastic lunch box has been turned from the foam lunch box to the environment-friendly lunch box. The original foam lunch box has been eliminated because it is not resistant to high temperature, and the production process has caused damage to the environment. It is taken from plastic lunch box, paper box, wooden lunch box, and degrading lunch box. Wait。 Because of its low toxicity, high melting point, high plasticity, easy production and low relative cost, plastics have become the mainstream materials for the manufacture of disposable fast food boxes.
The characteristics of a snack box cutting machine: when the cutting head is acted on the processed material by the tool die, the pressure in the cylinder does not reach the rated pressure. The pressure will increase with the increase of the contact time, until the electromagnetic reversing valve receives the signal, changes the direction of the valve, and the cutting head starts to reset. When the pressure in the oil cylinder is limited by the pressure of the cylinder, it may not reach the rated pressure value; that is to say, the pressure of the system has not reached the design value, and the punching is completed.