The adjustment of the cutting point of a semi-automatic precision four column cutting machine
1, setting of the knife mold work is completed, will be laid on the material on the plate, then put in the knife mold materials, and then promote the feed plate cutting area 2, respectively, with both hands pressed cutting switch. 12, the drop in pressure of cutting platen die cutter, cutter to cut off the material automatically after recovery to stop before starting position;
3, in the blanking material, such as material found not completely cutting when the cutting depth of 03 to adjust the controller will "clockwise reverse rotary pressure system, such as knife rubber molded into too deep, the pressure system to counter clockwise rotation, adjust the longer the cutting depth is deeper, try to to adjust the cutter slightly pressed into the sheet so far;
4, the feeding plate is pulled out of the cutting area, and the material is removed, and a blanking process is completed.