The working principle of the core component of the cutting machine
The working principle of the solenoid valve, the core component of the cutting machine:
There are closed chambers in the solenoid valve, open holes in different positions, each hole connected with different tubing, the middle of the cavity is a piston, and the two sides are two electromagnets, which will be attracted to the body of the magnet coil, which opens or closes the different holes by controlling the movement of the body, and the fluid is often opened. The oil pressure will enter different oil drain pipes, then push the piston of the oil cylinder through the pressure of the oil, the piston will also drive the piston rod, and the piston rod will drive the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.