The hydraulic transmission system of the reciprocating movement of the compound machine surface grinding machine worktable, the hydraulic pump 3 is driven by the electric motor to rotate, and the oil is suck from the oil tank 1. The oil filter enters the hydraulic pump through the oil filter 2, and the pressure sleeve is output through the hydraulic pump.
With large plastic material, the plastic deformation of the coating machine is larger, and it is easy to produce the chip tumor. The material with high plasticity and higher hardness has a relatively small height of the possible parts of the scraps and the height of the scraps. Generally, the cutting brittle material has no plastic deformation, and the broken chips are not flowing through the front surface of the knife, so there is generally no scraps.
A series of problems such as film curl, membrane wrinkle, bag making difficult, peel strength and bag deformation can be caused by the unsuitable tension control of dry type composite machine. The setting of tension is determined by the type, width, thickness, environment and temperature and humidity of the oven.
There are three common types of netted rolls, that is, conical, prismatic and oblique lines. The slash is coated with a high precision transfer poor adhesive. In dry composite, conical and prismatic reticle rolls are common.
Multilayer laminating composite machine rollers can be multi strip, multilayer material jointing, exhausting work fit tension material full controlled by magnetic tension controller, exhaust and rolling by servo control, the touch screen can be adjusted directly and accurately adjust the tension and speed, and has the power to maintain function, thereby reducing the the tedious work of repeated regulation, to ensure the smoothness of coating material, each joint can independently adjust the upper and lower rollers of the roller pressure, clearance, simple and convenient operation and use.