What kind of adjustment is the cutting machine?
The adjustment of the cutting machine
1, the position of the upper limit of the stroke of the cutting machine: the upper limit of stroke is the position of the pressure plate in the non working state. The distance between the swing arm and the worktable can be adjusted through the screw device in the column. This distance is related to the height of the die, the thickness of the chopping board and the thickness of the shoe material, so that the pressure plate after placing the die can be swung flexibly. But some models adjust the upper limit by means of small hand wheels and hydraulic devices on the pressboard. Although the position of the stroke limit is not very precise, it will affect the blanking efficiency if it is too high.
2, the position of the upper limit of the stroke of the cutting machine: the lower limit of stroke is the location when the shoe is cut when the pressboard is used. Fine tuning knob on the punch plate, the lower limit of time relay adjustment stroke. When adjusting, the delay time should be adjusted according to the thickness of the material being punched. But there are also some cutting machine models that are three button buttons on generai handles. Fine adjustment of stroke according to the hardness and thickness of shoes is more convenient. The lower limit of stroke is higher than that of the upper limit, so we need to carefully adjust it.