PLC die cutting machine System Maintenance Key Content
PLC die cutting machine can be said to be a high-precision, high efficiency equipment, for such equipment must extend the life of components and parts of the wear cycle, in order to improve the system's trouble-free working hours and equipment life. But how should this be done?
As the Hydraulic PLC die cutting machine system in some of the CMOS memory storage content in the power, mainly by battery-powered to maintain, it must regularly check and replace the equipment memory battery, so as not to come in handy. Generally here are lithium batteries or rechargeable nickel-cadmium batteries, when the battery voltage drops to a certain value will cause the parameters are lost, so check the main content is the battery voltage.
If the contents of the PLC system are reduced to a limit by the battery voltage or the battery voltage alarm occurs, replace the battery as soon as possible. Replace the battery in the PLC system power state, so as not to cause the storage of data loss. Once the parameter is lost, the parameter can be re-entered after the new battery has been replaced.
In addition to maintenance, but also should be as much as possible to reduce the Hydraulic Plane Cutting Machine PLC system, the number of electrical doors of the switch to prevent dust into the PLC device. Because the air in the workshop floating dust and metal powder in the printed circuit board and electrical connectors, likely to cause the insulation resistance between components decreased, resulting in failure, and even damage the components.
Some spindle control system is placed in a strong cabinet, the strong power off the door will lead to damage to the electrical components, spindle control failure, it must ensure the tightness of the strong doors to prevent the external dust into the cabinet inside, thus affecting The normal operation of the system.
The hydraulic flattening machine is a high-capacity machine that is clearly superior to other cutting processes; at the same time, the water cutting equipment is also complete without causing harmful gases or liquids, Produce heat, so the water knife cutting should be the real multi-functional, high-efficiency cold cutting processing.
However, the characteristics of hydraulic flat cutting machine by its numerical control operation software, must accurately operate the Hydraulic Plane Cutting Machine control software, in order to ensure the cutting quality, cutting efficiency and cutting costs are consistent with the above characteristics. The next step is about the Hydraulic PLC die cutting machine software, some of the conventional features.