Home > News > Content

Maintenance And Maintenance Of The Lamination Machine

Oct 19, 2017

Maintenance and maintenance of the Lamination Machine
Most automatic Lamination machines are equipped with a clean waste device. And most of the waste through the needle to complete the waste, but also the use of wood clean version to complete. Wooden clean version of the use of convenient, and the effect of waste than the clean waste needle, to improve the speed is a great help.
Clean the waste to pay attention to the following points:
① in the need to clear the waste as far as possible not to open even point.
② to ensure that the appropriate size of the waste hole, if the waste hole is too large, in the clean waste after the entire die-cut products will be dispersed: clean waste hole is too small, there will be clear off the phenomenon. In general, the waste hole is greater than the waste 1.5 ~ 2.0mm more appropriate.
③ in the clean version of the plate can also add some loose sponge, clean the time to suppress the paper, to avoid the die after the paper spread out. Lamination Machine with a waste disposal device in general, the paper is not a problem. The Lamination Machine part of the paper is not prone to pick up the paper, and it is possible to reduce the speed of the paper. Approach to solve, but will affect the die cutting efficiency.
Maintenance of the Lamination Machine
Lamination Machine maintenance is essential for any packaging printer. The maintenance of the Lamination Machine has played a positive role in ensuring die-cutting accuracy and extending the service life of the equipment, which has attracted wide attention.
The specific experience is as follows: Set out detailed items for each maintenance item and post it next to the machine in accordance with the machine maintenance instructions. You can refuel the equipment according to the oil level chart to be refueled. The cleaning of the nozzle, to ensure smooth paper: regular regulation of the regulation, the main chain, tooth row clean oil, check the dental sheet is damaged; check the main chain of elasticity, to ensure equipment accuracy; Balancing knives, such as unbalanced knife long-term die-cutting will make the equipment before and after the pressure is different: machine repair inspectors on the operator's regular maintenance content to check. implement.
In the maintenance and maintenance of the die-cutting version, the packaging and printing factories are equipped with a special die-cutting version of the administrator, according to different customers to store, and the daily die-cutting version of the use and use of records, When cutting on the board, check the die and indentation wire for inspection, repair or replacement.
Flattening die cutting process will be high speed. High precision, high reliability, the direction of the development of human-machine operation, packaging and printing operations operators need to keep up with the development trend, to master the relevant technology, and continue to accumulate in production to ensure the perfect quality of die-cutting, Product grade.
Lamination Machine is an important equipment for postpress processing to improve labor productivity. It is not only efficient, safe and high quality die-cutting equipment, but also one of the replacement products, favored by the majority of packaging and printing business units The So how to improve the quality of the Lamination Machine die cutting? The following Weissa came to introduce some of the methods, hoping to help everyone!
1, do not use die-cutting paper-like materials die-cutting die-cutting film materials;
2, Lamination Machine, try to cut the die-cutting area, especially the full version of small labels;
3, Lamination Machine die-cutting pad version to be often replaced, especially the long version of processing live;
4, Lamination Machine die cutting, Lamination Machine die cutting strength to be just right;
5, often check the die cutting quality, especially the automatic labeling of the label. To prevent the emergence of large quantities of quality questions.
6, die-cutting large area, messy image label, to the professional manufacturers to create die-cutting version;
7, to adhere to the Lamination Machine blade sharp, the establishment of archives, records the use of each die-cutting version, in order to replace the blade in time. To use a small point of view, high hardness of the special blade die-cutting film pressure sensitive adhesive materials, especially PE material.