Home > News > Content

The Machining Principle Of Lamination Machine

Jul 06, 2017

The machining principle of Lamination Machine


The processing principle of "first return" and "coarse-fine separation" should be followed when the ding art process of the box body parts is developed.


(1) the principle of first face-back hole. The box body parts should be machined mainly flat (and may include some minor larger planes), and then the processing of the paper holes. It can provide a stable and bad positioning reference for hole processing, which is easy to ensure the precision of the hole and the technical requirement. In addition, main is to support and pulp in machine assembly benchmark, L first processing main plane can make positioning methods huai and assembly of distress overlap, thereby eliminating positioning error caused by benchmark without heavy machine.


(2) the principle of separation of coarse and fine. For composite machine precision, just a qiang stent body parts, in order to reduce the processing of deformation, separately from the general to coarse, phase processing, namely in the main plane and bearing hole after rough machining, within the rod surface finishing. It is helpful for the processing of the processing precision and the processing accuracy. For the precision not too high, rigid and better support box body parts, coarse, Lamination Machine does not need to be raised.

According to the above two principles, the technological process of the manifold parts with higher accuracy for casting blank a late fire place don't a crossed a mandarin and [main plane a rough machining bearing hole a aging treatment a crossed a finishing mainly flat mass of a finishing Wen Cheng hole processing other secondary surface inspection.


(1) first, the first, the post-hole principle. The box body parts should be machined mainly flat (and may include some minor larger planes), and then the processing of the paper holes. Lamination Machine It can provide stable and bad positioning datum for hole processing by means of the planar, and it is easy to ensure the machining accuracy and the technical requirement of the hole. In addition, Lamination Machine main is to support and pulp in machine assembly benchmark, L first processing main plane can make positioning methods huai and assembly of distress overlap, thereby eliminating positioning error caused by benchmark without heavy machine.


(2) the principle of separation of coarse and fine. For composite machine precision, just a qiang stent body parts, in order to reduce the processing of deformation, separately from the general to coarse, phase processing, namely in the main plane and bearing hole after rough machining, within the rod surface finishing. In this way, it is beneficial to the aging treatment and the processing accuracy. Lamination Machine For the precision not too high, rigid and better support box body parts, coarse, Lamination Machine does not need to be raised.


According to the above two principles, Lamination Machine the technological process of the manifold parts with higher accuracy for casting blank a late fire place don't a crossed a mandarin and [main plane a rough machining bearing hole a aging treatment a crossed a finishing mainly flat mass of a finishing Wen Cheng hole processing other secondary surface inspection.