Home > News > Content

The Main Use And Working Process Analysis Of The Flame Composite Machine

Jan 25, 2018

The main use and working process analysis of the flame composite machine

The composite machine is simply a composite equipment that combines two or more than two materials with a wide range of uses. And the composite machine can be divided into various types according to different uses. Below, we simply introduce the features and uses of the flame type composite machine.

The flame type composite machine is mainly used for the combination of sponges and other types of textile products. Its main feature is the use of a flame retardant sponge and used as a bonding material, in this process, no use of glue. After the flame jet melted adhesive, has good application in adhesive, plush suede. And the most important thing is that it has the characteristics of environmental protection, good feeling and water washing.

A simple understanding of the working process of the flame composite machine

1. preparation

First of all, according to the direction of the line, the substrate will be loaded along all the guide rollers, and the adhesive will be proportionately allocated to start the heating system of the oven. When the corresponding temperature is set, then the transmission motor will be turned on, and then the coating production can begin.

2. coating

The substrate of the reel device must first pass the reticulated roll, after the coating is coated, and then dried through the drying path, that is, the coating process is completed.

3. compound

The compound process is realized by the EPC gas liquid rectifying into the composite part and fitting with the base material of the second reel part.

4. cooling reel

After cooling, the overall production and processing of the base material is completed.

Attention should be paid to the following problems in production

(1) adjust the planeness of the base material by adjusting the position of the adjustment roller

(2) adjusting the compound pressure between the composite rolls by adjusting the relative distance between the two composite rolls