Home > News > Content

The Wide Application Of The Lamination Machine

Jul 17, 2017

The wide application of the Lamination Machine

General said the Lamination Machine refers to home textile, clothing, furniture, car interiors and other related industries, a composite equipment, mainly used for all kinds of fabrics, leather, film, paper, sponge layer or multilayer laminating process. Concrete is divided into a rubber compound and rubber compound, rubber compound is divided into water rubber oil, PU adhesive, hot melt adhesive, etc., without glue between composite process for direct hot-pressing glue or use the flame composite. At present, the national standard of Lamination Machine has been implemented.


1. Apply the adhesion to the materials such as flow film, breathable membrane and non-woven fabric. Applicable to baby diaper, medical protective clothing, food desiccant packaging and other products

2. The application is used in non-woven materials such as adhesive composite (bonding) and cutting processing. It is suitable for the processing of household air purifier, automobile air purifier, air conditioner, refrigerator etc.

Because of the heavy workload of the Lamination Machine, it should be maintained at regular intervals, and it should be changed to a good working environment for the Lamination Machine. First, make sure the Lamination Machine is working in a clean environment, so as to keep the compound away from dust.

At the same time, should guarantee the Lamination Machine work environment relatively dry not wet, at the same time don't placed on composite panel on board too heavy objects, avoid environment or foreign body the effects on the copier. Also, be careful not to place hard objects on the perimeter or fuselage of the compound, especially metals such as paper clips or pins. These metals once fell into to the Lamination Machines, light will cut Lamination Machine internal components, heavy will make these metals come into contact with the circuit board, led to the copier internal electronic elements short circuit, which damage the Lamination Machine.

In addition, in use process, whether in the plug power supply, cables, or exclude card failure, etc., must be after the cut off the composite mechanical and electrical source, to operate again, charged operation will cause current impact, it is easy to breakdown the circuit boards of Lamination Machine.

When doing regular maintenance, avoid by all means do not use chemical solvents, also don't use more hard wet cloth, to clean the Lamination Machine internal dust, cabinet, stains, more do not use a similar tissue paper products, such as to clean the copier, baoding patent agent Baoding patent agent for filing an application for a patent for the baoding baoding patent agency in order to avoid the confetti residues in Lamination Machine.

In addition to the step-by-step process of working with the Lamination Machine step by step, you need to use and set up correctly. Correctly placed copy of paper can not only guarantee the normal printing, but also effectively eliminate the copier paper.

When use, the user should be in accordance with the instructions will be copy paper to put into the carton, ensure the machine is in use process is not short of paper, at the same time will copy paper is placed into the carton, pay attention to the position of smoothness, and make sure the paper don't put too full, another guide into the cartons should be transferred to the paper with the same width.

In addition, when using the Lamination Machine, do not close the compound directly, but should be in about 40 minutes or so, make sure that the compound electromechanical source is switched off when there is no photocopying task. This can achieve the purpose of saving power and ensure that the Lamination Machine does not start frequently.