Home > News > Content

Use The Swing Arm Cutting Machine Note

Jun 28, 2017

Use the Swing Arm Cutting Machine Note

1) double focal length laser cutting head is the Swing Arm Cutting Machine on the vulnerable items, long-term use, resulting in laser cutting head damage.
2) every six months to check the optical fiber swing arm track straightness and machine verticality, found that the normal maintenance and timely debugging. Did not do this, it is possible to cut out the effect is not how good, the error will increase, affecting the quality of cutting. This is the top priority, must be done.
3) once a week with a vacuum cleaner to remove the dust and dirt inside the machine, all electrical cabinet should be closed dust.
4) often check the fiber Swing Arm Cutting Machine strip, sure to tighten. Or in the operation of a problem, there may be hurt people, serious can lead to death. Steel looks like a small thing, a problem is still a bit serious.
5) Optical fiber Swing Arm Cutting Machine The rails should always clean up, remove dust and other debris, to ensure that the equipment should always wipe the regular rack, plus lubricants, to ensure lubrication without debris. Rails to be regularly cleaned and on the oil, there is the motor should also be regularly cleaned and on the oil, the machine will be able to walk better, more accurate cutting, cutting out the quality of the product will be improved
Swing Arm Cutting Machine, including Swing Arm Cutting Machine, laser engraving machine, laser marking machine, laser welding machine, Swing Arm Cutting Machine how to use its advantages and disadvantages of what?

    First, the energy of the laser is concentrated in the form of light into a high-density beam, the beam is transmitted to the surface of the work, produce enough heat, so that the material melting, coupled with the beam coaxial high-pressure gas directly remove the molten metal, so as to achieve the purpose of cutting, This shows that the laser cutting machine with the machine tool has a fundamental difference.
    Swing Arm Cutting Machine uses the laser beam emitted from the laser generator, through the optical path system, focusing on high-power density of the laser beam irradiation conditions, the laser heat absorbed by the workpiece material, the workpiece temperature rose sharply to reach the boiling point, the material began to vaporize and The formation of holes, accompanied by high pressure air flow, with the beam and the relative position of the workpiece movement, and ultimately the material to form a slit. The cutting process parameters (cutting speed, laser power, gas pressure, etc.) and the trajectory are controlled by the numerical control system. 

The slag at the slit is blown by the auxiliary gas of a certain pressure.

1. Fiber laser with high efficiency of electro-optical conversion, conversion efficiency of more than 30%, low-power fiber lasers without a chiller, the use of air-cooled, can save a lot of power consumption, save operating costs, to achieve the highest production efficiency ;
2. Laser operation requires only electrical energy, no need to generate additional laser gas, with the lowest operating and maintenance costs;
3. Fiber laser using semiconductor modular and redundant design, resonant cavity without optical lens, no start-up time, with no adjustment, maintenance-free, high stability advantages, reducing the cost of accessories and maintenance time, which is traditional Lasers can not match;
4. Fiber laser output wavelength of 1.064 microns, is the wavelength of CO2 1/10, the output beam of good quality, high power density, is very conducive to the absorption of metal materials, with excellent cutting, welding capacity, so that the cost of processing lowest;
5. Machine optical routing fiber transmission, do not need complex mirrors and other light guide system, light path is simple, stable structure, external light path maintenance;
6. Cutting head containing protective lenses, so that focusing lenses and other valuable consumables consumption is minimal;
7. Light through the fiber derived, so that the mechanical system design has become very simple, very easy to integrate with the robot or multi-dimensional table;
8. Laser with the shutter can be a multi-machine, through the optical fiber splitting, divided into multiple multi-station work at the same time, easy to expand the function, easy to upgrade, simple;
9. Fiber laser small size, light weight, the working position can be moved, small footprint.